System:error:code[:Next]; System:error:count - Keithley 2461 Reference Manual

Section 6: SCPI command reference

:SYSTem:ERRor:CODE[:NEXT]?

This command reads the oldest error code.
Type
Query only
Usage
:SYSTem:ERRor:CODE[:NEXT]?
Details
This command returns the numeric code of the next error in the event log. The error is cleared from
the queue after being read.
This command returns only error messages from the event log. To return information and warning
messages, see :SYSTem:EVENtlog:NEXT?
Example
SYST:ERR:CODE?
Also see
:SYSTem:EVENtlog:NEXT?

:SYSTem:ERRor:COUNt?

This command returns the number of errors in the event log.
Type
Query only
Usage
:SYSTem:ERRor:COUNt?
Details
This command does not return other types of events, such as information messages. To return other
types of events, use :SYSTem:EVENtlog:COUNt?
This command does not clear the errors from the event log.
Example
SYST:ERR:COUN?
Also see
:SYSTem:EVENtlog:COUNt?
6-148
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Affected by
Not applicable
(on page 6-150)
Affected by
Not applicable
(on page 6-149)
Where saved
Not applicable
Returns the error code of the next error in
the event log.
For example, if error -222, Parameter data
out of range error, occurred, the output is:
-222
Where saved
Not applicable
If there are five errors in the event log, the
output is:
5
Default value
Not applicable
Default value
Not applicable
2461-901-01 A/November 2015