Model 2461 Interactive SourceMeter® Instrument Reference Manual
Using the SCPI command reference
The SCPI command reference contains detailed descriptions of each of the SCPI commands that you
can use to control your instrument. Each command description is broken into several standard
subsections. The figure below shows an example of a command description.
Each command listing is divided into five subsections that contain information about the command:
•
Command name and summary table
•
Usage
•
Details
•
Example
•
Also see
The content of each of these subsections is described in the following topics.
2461-901-01 A/November 2015
Figure 157: SCPI command description example
Section 5: Introduction to SCPI commands
5-5