Trigger:block:branch:always; Trigger:block:branch:counter - Keithley 2461 Reference Manual

Section 6: SCPI command reference

:TRIGger:BLOCk:BRANch:ALWays

This command defines a trigger model block that always goes to a specific block.
Type
Command only
Usage
:TRIGger:BLOCk:BRANch:ALWays <blockNumber>, <branchToBlock>
<blockNumber>
<branchToBlock>
Details
When the trigger model reaches a branch-always building block, it goes to the building block set by
<branchToBlock>.
Example
TRIG:BLOC:BRAN:ALW 9, 20
Also see
None

:TRIGger:BLOCk:BRANch:COUNter

This command defines a trigger model block that branches to a specified block a specified number of times.
Type
Command only
Usage
:TRIGger:BLOCk:BRANch:COUNter <blockNumber>, <targetCount>, <branchToBlock>
<blockNumber>
<targetCount>
<branchToBlock>
6-186
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
The sequence of the block in the trigger model
The block number of the trigger model block to execute when the trigger model
reaches this block
Affected by
Recall settings
Instrument reset
Power cycle
The sequence of the block in the trigger model
The number of times to repeat
The block number of the trigger model block to execute when the counter
is less than to the <targetCount> value
Where saved
Save settings
When the trigger model reaches block 9, it
will always branch to block 20.
Where saved
Save settings
Default value
Not applicable
Default value
Not applicable
2461-901-01 A/November 2015