Trigger.lanin[N].Edge; Trigger.lanin[N].Overrun - Keithley 2461 Reference Manual

Model 2461 Interactive SourceMeter® Instrument Reference Manual

trigger.lanin[N].edge

This attribute sets the trigger operation and detection mode of the specified LAN event.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
edgeMode = trigger.lanin[N].edge
trigger.lanin[N].edge = edgeMode
edgeMode
N
Details
This command controls how the trigger event detector and the output trigger generator operate on the
given trigger. These settings are intended to provide behavior similar to the digital I/O triggers.
LAN trigger mode values
Mode
trigger.EDGE_EITHER
trigger.EDGE_FALLING
trigger.EDGE_RISING
Example
trigger.lanin[1].edge = trigger.EDGE_FALLING
Also see
Digital I/O
TSP-Link system expansion interface

trigger.lanin[N].overrun

This attribute contains the overrun status of the LAN event detector.
Type TSP-Link accessible
Attribute (R) Yes
Usage
overrun = trigger.lanin[N].overrun
overrun
N
2461-901-01 A/November 2015
Affected by
Restore configuration
Instrument reset
Power cycle
The trigger mode; see the Details for more information
The LAN event number (1 to 8)
Trigger packets detected as input
Rising or falling edge (positive or
negative state)
Falling edge (negative state)
Rising edge (positive state)
(on page 3-86)
Affected by
LAN trigger N clear
The trigger overrun state for the specified LAN packet (true or false)
The LAN event number (1 to 8)
Where saved
Configuration script
Set the edge state of LAN event 1 to falling.
(on page 3-150)
Where saved
Not applicable
Section 8: TSP command reference
Default value
trigger.EDGE_EITHER
LAN trigger packet generated
for output with a...
negative state
negative state
positive state
Default value
Not applicable
8-249