Smu.measure.limit[Y].Audible - Keithley 2461 Reference Manual

Section 8: TSP command reference

smu.measure.limit[Y].audible

This attribute determines if the instrument beeper sounds when a limit test passes or fails, or disables the beeper.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = smu.measure.limit[Y].audible
smu.measure.limit[Y].audible = state
state
Y
Details
The tone and length of beeper cannot be adjusted.
Example
See smu.measure.limit[Y].fail
Also see
smu.measure.limit[Y].enable
8-152
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Affected by
Restore configuration
Instrument reset
Power cycle
Measure configuration list
When the beeper sounds:
Never: smu.AUDIBLE_NONE
•
On test failure: smu.AUDIBLE_FAIL
•
On test pass: smu.AUDIBLE_PASS
•
Limit number: 1 or 2
(on page 8-155) for an example of how to use this command.
(on page 8-154)
Where saved
Configuration script
Measure configuration list
Default value
smu.AUDIBLE_NONE
2461-901-01 A/November 2015