Appendix D: Convert Model 2400 to Model 2461 code
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
D-14
Model 2461 Interactive SourceMeter® Instrument Reference Manual
[:SENSe[1]]:AVERage:TCONtrol
[:SENSe[1]]:AVERage:TCONtrol?
[:SENSe[1]]:<function>:AVERage:TCONtrol
<function> is VOLTage[:DC], CURRent[:DC], or RESistance.
This is now set for each measurement function.
[:SENSe[1]]:CURRent[:DC]:NPLCycles
[:SENSe[1]]:CURRent[:DC]:NPLCycles?
[:SENSe[1]]:RESistance:NPLCycles
[:SENSe[1]]:RESistance:NPLCycles?
[:SENSe[1]]:VOLTage[:DC]:NPLCycles
[:SENSe[1]]:VOLTage[:DC]:NPLCycles?
[:SENSe[1]]:<function>:NPLCycles
VOLTage[:DC], CURRent[:DC], or RESistance.
[:SENSe[1]]:<function>:NPLCycles?
If you send [:SENSe[1]]:NPLCycles, it sets NPLCs for all functions.
[:SENSe[1]]:CURRent[:DC]:PROTection[:LEVel]
[:SENSe[1]]:CURRent[:DC]:PROTection[:LEVel]?
:SOURce[1]:<function>:<x>LIMit[:LEVel]
[:SENSe[1]]:CURRent[:DC]:PROTection:RSYNchronize
[:SENSe[1]]:CURRent[:DC]:PROTection:RSYNchronize?
[:SENSe[1]]:VOLTage[:DC]:PROTection:RSYNchronize
[:SENSe[1]]:VOLTage[:DC]:PROTection:RSYNchronize?
Not available
Range synchronization is always turned on in Model 2461
[:SENSe[1]]:CURRent[:DC]:PROTection:TRIPped?
:SOURce[1]:<function>:<x>LIMit[:LEVel]:TRIPped?
[:SENSe[1]]:CURRent[:DC]:RANGe:AUTO
[:SENSe[1]]:CURRent[:DC]:RANGe:AUTO?
[:SENSe[1]]:RESistance:RANGe:AUTO
[:SENSe[1]]:RESistance:RANGe:AUTO?
[:SENSe[1]]:VOLTage[:DC]:RANGe:AUTO
[:SENSe[1]]:VOLTage[:DC]:RANGe:AUTO?
[:SENSe[1]]:<function>:RANGe:AUTO
VOLTage[:DC], CURRent[:DC], or RESistance.
[:SENSe[1]]:<function>:RANGe:AUTO?
(on page 6-56), where
(on page 6-60), where <function> is
(on page 6-94)
(on page 6-95)
(on page 6-62), where <function> is
2461-901-01 A/November 2015