Trigger.lanout[N].Ipaddress - Keithley 2461 Reference Manual

Section 8: TSP command reference

trigger.lanout[N].ipaddress

This attribute specifies the address (in dotted-decimal format) of UDP or TCP listeners.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
ipAddress = trigger.lanout[N].ipaddress
trigger.lanout[N].ipaddress = ipAddress
ipAddress
N
Details
Sets the IP address for outgoing trigger events.
After you change this setting, you must send the connect command before outgoing messages can
be sent.
Example
trigger.lanout[3].protocol = lan.PROTOCOL_TCP
trigger.lanout[3].ipaddress = "192.0.32.10"
trigger.lanout[3].connect()
Also see
trigger.lanout[N].connect()
8-254
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Affected by
Restore configuration
Instrument reset
Power cycle
The LAN address for this attribute as a string in dotted decimal notation
The LAN event number (1 to 8)
(on page 8-252)
Where saved
Configuration script
Set the protocol for LAN trigger 3 to be TCP
when sending LAN triggers.
Use IP address "192.0.32.10" to connect
the LAN trigger.
Default value
"0.0.0.0"
2461-901-01 A/November 2015