Keithley 2461 Reference Manual page 1046

Appendix B: Common commands
*TST?
This command is accepted and returns 0. A self-test is not actually performed.
Type
Query only
Usage
*TST?
Also see
None
*WAI
This command postpones the execution of subsequent commands until all previous overlapped commands are
finished.
Type
Command only
Usage
*WAI
Details
There are two types of instrument commands:
•
Overlapped commands: Commands that allow the execution of subsequent commands while
instrument operations of the overlapped command are still in progress.
•
Sequential commands: Commands whose operations must finish before the next command is
executed.
The *WAI command suspends the execution of commands until the instrument operations of all
previous overlapped commands are finished. The *WAI command is not needed for sequential
commands. Typically, this command is sent after the initiate trigger model command.
Also see
:INITiate[:IMMediate]
waitcomplete()
B-10
Affected by
Not applicable
Affected by
Not applicable
(on page 6-182)
(on page 8-340)
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Where saved
Not applicable
Where saved
Not applicable
Default value
0
Default value
Not applicable
2461-901-01 A/November 2015