Tray 1 Not In Position - Xerox DocuColor 2240 Service Manual

3-946 Tray 1 Not In Position

Tray 1 not in ready position.
Initial Actions
• Check that the paper size setting is correct.
• Check the Tray 1 Paper Size Sensor for damage or incorrect mounting. Repair or replace
as required.
• Check the switch actuators on Tray 1 for wear or damage. Repair or replace as required
Procedure
Ensure Tray 1 is closed. Switch the power off then on. The problem continues.
Y N
Return to Service Call Procedures.
Go to the 7-270 RAP.
Initial issue
DC 3535/2240/1632
3-947 Tray 2 Not In Position
Tray 2 not in ready position.
Initial Actions
• Check that the paper size setting is correct.
• Check the Tray 2 Paper Size Sensor for damage or incorrect mounting. Repair or replace
as required.
• Check the switch actuators on Tray 2 for wear or damage. Repair or replace as required
Procedure
Ensure Tray 2 is closed. Switch the power off then on. The problem continues.
Y N
Return to Service Call Procedures.
Go to the 7-271 RAP.
02/03
2-41
Status Indicator RAPs
3-946, 3-947