Tray 5 Empty - Xerox DocuColor 2240 Service Manual

Figure 2 9-353 RAP Circuit Diagram - Tray 4 No Paper Sensor (3TM)
Status Indicator RAPs
3-953, 3-954

3-954 Tray 5 Empty

Paper is not detected in Tray 5.
Procedure
Enter dC330 [007-125] and press Start. Actuate the Tray 5 No Paper Sensor. The display
changes.
Y N
Press Stop. Check the circuit of the Tray 5 No Paper Sensor
99-2 RAP for troubleshooting procedure.
Press Stop.
• Ensure that the connectors shown in the circuit diagram
nected and that the wires are not damaged.
• Replace the Tray 5 No Paper Sensor
• If the problem persists, replace the MCU PWB
Figure 1 3-954 RAP Circuit Diagram - Tray 5 No Paper Sensor
02/03
2-46
(Figure 1). Refer to the
(Figure 1) are securely con-
(PL 2.13).
(PL 13.1)
Initial issue
DC 3535/2240/1632
OF