REP 6.1 ROS
Parts List on
PL 3.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Right Cover
(REP
14.3).
2.
Remove Rear Cover
(REP
14.2).
Do not remove the covers on the ROS cleaning openings. Image quality defects could result.
3.
Remove ROS
(Figure
1).
NOTE: Carefully observe position of wiring harness for later reinstallation.
1
Remove screws (2)
4
Remove the
ROS
3
Remove Harness
from clips
Figure 1 Removing ROS
Replacement
After machine reassembly, adjust the Color Registration
Initial issue
DC 3535/2240/1632
WARNING
CAUTION
2
Disconnect
connectors (2)
(ADJ
9.6).
02/03
4-39
Repairs and Adjustments
REP 6.1