Rep 9.20 Right Lift Assembly - Xerox DocuColor 2240 Service Manual

REP 9.20 Right Lift Assembly

Parts List on PL 5.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Remove Fuser Cover (REP 14.8).
3. Remove Waste Toner Cartridge (REP
4. Remove Waste Toner Cartridge Cover
5. Remove Inner Cover (REP 14.10).
6. Remove Drum Cartridges (REP 9.1).
7. Remove Right Cover (REP 14.3).
8. Remove IBT Belt Assembly (REP 9.15).
9. Remove Lever Assembly (REP 9.18).
10. Remove Plate (Figure 1).
a. Remove e-rings (2) and washers (2).
b. Remove screws (4) and remove Plate.
c. Remove bearings (2) and washers (2).
Washer
Bearing
Figure 1 Removing Plate
Repairs and Adjustments
REP 9.20
WARNING
9.4).
(REP 9.3).
Washer
Bearing
Plate
Washers (2)
E-Rings (2)
Screws (4)
11. Remove Right Lift Assembly (Figure
a. Remove Auger mounting screws (2).
b. Remove lift position screw.
c. Remove secondary position screw.
d. Remove lower screws (2).
e. Remove Right Lift Assembly.
Lift Position
Screw
Figure 2 Removing Right Lift Assembly
Replacement
Move Lever to down position before reinstalling IBT Belt Assembly.
02/03
4-86
2).
Lift Secondary
Position Screw
Auger
Mounting
Screws (2)
Lower Screws (2)
DC 3535/2240/1632
Initial issue