Insufficient Page Memory - Xerox DocuColor 2240 Service Manual

3-941 Insufficient Page Memory

Procedure
Switch the power off then on. The problem continues.
Y N
Return to Service Call Procedures.
Perform the operation again.
Status Indicator RAPs
3-941, 3-942
3-942 Document Size Error
DADF mode: The DADF Document Sensors cannot determine the size of the original.
Platen mode: The APS Sensor cannot determine the size of the original.
Procedure
DAFD mode:
• If the document prefeeds into the DADF before the fault is declared, go to the
• If no prefeed takes place, or if the Feed Motor does not energize, go to the
Platen mode:
• Ensure that the Platen Glass, Lens, and APS Sensor are clean.
• Ensure that the original is correctly registered.
02/03
2-40
5-195 RAP.
5-110 RAP.
Initial issue
DC 3535/2240/1632