REP 7.12 Tray 4 Feeder (TTM)
Parts List on PL 16.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove the Tray 2.
2.
Pull out the Tray 3/4.
3.
Remove the Stud Bracket (Figure 1).
Remove Screw
and Bracket
Figure 1 Removing Stud Bracket
Initial issue
DC 3535/2240/1632
WARNING
4.
Remove the Tray 4 Feeder Assembly (Figure 2).
1
Disconnect
P/J
Figure 2 Removing the Tray 4 Feeder Assembly
02/03
4-61
2
Loosen
Screw
3
Remove Screw and
Feeder Assembly
Repairs and Adjustments
REP 7.12