Interface With Invalid Parameter Cp - Xerox DocuColor 2240 Service Manual

102-332 Interface with Invalid Parameter CP

Interface failure. Incorrect parameter was detected at the Drv. I/F between the DM and CP.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Check the D-RAM and ROM.
If the problem continues, perform re-installation of the software.
Initial issue
DC 3535/2240/1632
102-333 Interface with Impossible Communication
Interface failure. Impossible communication with the Control Panel was detected. H/W connec-
tion failure in the Panel, or the internal connection was unable to be detected correctly.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
02/03
2-411
Status Indicator RAPs
102-332, 102-333