Xerox DocuColor 2240 Service Manual page 142

D
Y N
Replace the Tray Module PWB
Replace the Takeaway Motor 1 (PL 15.9).
Check the drives of the Takeaway Motor 1 (refer to
Press Stop.
• Ensure that the Chutes (PL 2.3, PL 15.10) are properly seated and not damaged.
• Check the Pinch Rolls (PL 2.3, PL 15.10) for damage or contamination.
• Ensure that the connectors shown in the circuit diagrams
are securely connected and that the wires are not damaged.
• If the problem persists, replace the Tray Module PWB
Figure 1 7-104 RAP Circuit Diagram - Tray 1 Feed Out Sensor
Figure 2 7-104 RAP Circuit Diagram - Takeaway Sensor TTM
Status Indicator RAPs
7-104
(PL 15.9).
PL 15.9)
(Figure 1, Figure 4,
(PL 15.9).
Figure 5)
Figure 3 7-104 RAP Circuit Diagram - Takeaway Motor 1 TTM
Figure 4 7-104 RAP Circuit Diagram - Takeaway Sensor 3TM
02/03
2-112
Initial issue
DC 3535/2240/1632