Rep 9.5 Full Toner Sensor; Rep 9.6 Dispenser Cover - Xerox DocuColor 2240 Service Manual

REP 9.5 Full Toner Sensor

Parts List on PL 4.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Remove Waste Toner Cartridge (REP
3. Remove Waste Cartridge Toner Cover
4. Access Full Toner Sensor (Figure 1).
a. Lift left end slightly and pull left to disengage mounting tabs.
b. Rotate Sensor Support and remove. Left end harness connection limits movement.
Connected
Harness
Left
End
Figure 1 Accessing Full Toner Sensor
5. Remove Full Toner Sensor (Figure
a. Push against sensor head while releasing locking tabs.
b. Disconnect sensor from harness.
Locking
Tabs
Sensor
Head
Figure 2 Removing Full Toner Sensor
Initial issue
DC 3535/2240/1632
WARNING
9.4).
(REP 9.3).
Sensor
Mounting Tabs
Support
2).
Full Toner
Sensor

REP 9.6 Dispenser Cover

Parts List on PL 10.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Open Left Cover Assembly.
3. Remove Y, M, C, K, Drum.
4. Remove Fuser Cover (REP 14.8).
5. Release Lever and move half way down.
6. Remove Dispenser Cover (Figure
a. Remove Screws (4).
b. Remove Dispenser Cover.
Screws (4)
Figure 1 Removing Dispenser Cover
02/03
4-75
WARNING
1).
Repairs and Adjustments
REP 9.5, REP 9.6