Initial Issue - Xerox DocuColor 2240 Service Manual

1-300 RAP
The Left Cover is open.
Procedure
Enter dC330 [001-301] and press the Start button. Open and close the Left Cover
The Display changes state.
Y N
+24 VDC is measured between +24 LVPS P/J502-1 and GND(-).
Y N
Replace the LVPS (PL 9.1).
Disconnect P/J172 from the Left Cover Interlock Switch
check the resistance between A1 and B1 when the switch is actuated. The
is less than 3 ohms.
Y N
Replace the Left Cover Interlock Switch
Reinstall the switch. Close the Left Cover
J535-A1 on the I/F PWB and GND.
Y N
Repair the open circuit between the +24 VDC LVPS and the I/F PWB.
Replace the I/F PWB (PL 9.1).
If the problem continues, replace the MCU PWB
Check the installation of the Cover/Actuator.
Figure 1 1-300 RAP Circuit Diagram - Left Cover Interlock Switch

Initial issue

DC 3535/2240/1632
(PL
(PL 2.11). Refer to Figure 1
resistance
(PL 2.11).
(PL 2.7). +24 VDC is measured between P/
(PL 13.1).
2.7).
and
02/03
2-9
Status Indicator RAPs
1-300