REP 12.9 Belt
Parts List on
PL 17.7
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove the Rear Cover
(PL
17.5)
2.
Remove the Cam Bracket
(REP
12.18).
3.
Remove the Belt
(Figure
1).
Remove
Clip, Pulley,
and Belt
Figure 1 Removing the Belt
Initial issue
DC 3535/2240/1632
WARNING
REP 12.10 Rail
Parts List on
PL 17.9
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove the following:
a.
Front Cover
(PL
17.5)
b.
Rear Cover
(PL
17.5)
2.
Remove Harness from Stapler
4
Disconnect
Harness
from Motor
and remove
Harness
from Guide
Figure 1 Removing Harness from Stapler
02/03
4-113
WARNING
(Figure
1).
1
Disconnect Stapler
Connectors (2)
Repairs and Adjustments
REP 12.9, REP 12.10
2
Disconnect
Sensor
3
Disconnect
Harness Clip
from Frame