Privilege Command - Xerox DocuColor 2240 Service Manual

102-350 Privilege Command

Privilege command
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
Status Indicator RAPs
102-350, 102-351
(PL 18.2)
102-351 No FPU Exception
Exceptional FPU non-existence
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
02/03
2-420
(PL 18.2)
Initial issue
DC 3535/2240/1632