Rep 12.3 Entrance Sensor And Top Tray Full Sensor - Xerox DocuColor 2240 Service Manual

REP 12.3 Entrance Sensor and Top Tray Full Sensor

Parts List on PL 17.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove the H Transport Assembly
2. Remove the Entrance Upper Cover
3. Remove the Cover (Figure 1).
1
Push up on the
release tab
Figure 1 Removing the Cover
Initial issue
DC 3535/2240/1632
WARNING
(REP 12.1).
(REP 12.17).
2
Move the Cover as
indicated to remove it
4. Remove the H Transport Entrance Sensor or Top Tray Full Sensor
Top Tray Full
Sensor
Entrance
Sensor
Figure 2 Removing Entrance Sensor and Top Tray Full Sensor
02/03
4-103
(Figure 2).
Disconnect
and Remove
Sensors
Repairs and Adjustments
REP 12.3