Rep 9.26 Atc Sensor - Xerox DocuColor 2240 Service Manual

REP 9.26 ATC Sensor

Parts List on PL 6.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Front Cover (REP 14.7).
2. Remove Drum Cartridges(REP 9.1).
3. Remove Waste Toner Cartridge (REP
4. Remove Waste Toner Cartridge Cover
5. Remove Fuser Cover (REP 14.8).
6. Remove Dispenser Cover (REP 9.6).
7. Remove all Toner Dispensers (REP
NOTE: In next step, do not remove sensor.
8. Remove housing for Full Toner Sensor
NOTE: In next step, it may not be necessary to disconnect harnesses for Plate Assembly (PL
4.2) to remove a developer housing.
9. Remove Plate Assembly (REP 9.8).
10. Remove Developer Housing (REP
11. Release Harness from Harness Clips
1
2
Carefully notice posi-
Release Tab and
tion of wires
remove wires
Figure 1 Removing Harness form Clips
Initial issue
DC 3535/2240/1632
WARNING
9.4).
(REP 9.3).
9.7).
(REP 9.5).
9.9).
(Figure 1).
3
Lift Tab and remove wires
12. Remove ATC Sensor (Figure
1
Lift Lock
and move
end away
from Tab
Figure 2 Removing ATC Sensor
02/03
4-95
2).
2
Remove Seal
from under
Sensor
Repairs and Adjustments
REP 9.26