Iot Top Tray Full - Xerox DocuColor 2240 Service Manual

12-969 IOT Top Tray Full

The Top Tray Full Sensor has detected full status for 10 sec.
Procedure
Enter dC330 [012-215] and press Start. Position some paper near the Top Tray Full Sensor
(Figure 1), then move the paper away. The display changes.
Y N
Press Stop. Check the circuit of the Top Tray Full Sensor
RAP for troubleshooting procedure.
Press Stop.
• Ensure that the connectors shown in the circuit diagram
nected and that the wires are not damaged.
• Replace the Top Tray Full Sensor (PL
• If the problem persists, replace the Finisher PWB
Top Tray Full
Sensor
Figure 1 Component Location
Figure 2 12-969 RAP Circuit Diagram - Top Tray Full Sensor
Status Indicator RAPs
12-969
(Figure 2). Refer to the
(Figure 2) are securely con-
17.4)
(PL 17.13) (Figure 3).
OF 99-1
02/03
2-296
Figure 3 Finisher PWB
DC 3535/2240/1632
Initial issue