Interface Dm - Acd Drv. I/F - Xerox DocuColor 2240 Service Manual

102-336 Interface DM - ACD Drv. I/F

Interface failure. Incorrect parameter was detected at the Drv. I/F between the DM and ACD.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Check the D-RAM and ROM.
If the problem continues, perform re-installation of the software.
If the problem continues, replace the Control Panel
Initial issue
DC 3535/2240/1632
(PL 18.2)
102-337 Frame Data Error with Invalid Data Type
Invalid frame data was detected. The incorrect value of the Data Type detected by Frame ID
was detected.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Check the D-RAM and ROM.
If the problem continues, perform re-installation of the software.
If the problem continues, replace the Control Panel
02/03
2-413
(PL 18.2)
Status Indicator RAPs
102-336, 102-337