Setting Dial-Up Connection Parameters - Huawei HG531s V1 Quick Start Manual

Indicator Expected State Description
Blinking green
LAN1 ～
LAN4
Steady green
Blinking green
USB
Steady green
3

Setting Dial-Up Connection Parameters

Configuring a Dial-Up Connection to Access the Internet
The HG531s V1 works in bridge mode by default. You need to install and configure a
dial-up connection on your computer, and perform it each startup.
Before setting dial-up connection parameters, verify that the HG531s V1 is correctly
connected to your computer and you have the dial-up connection account name and
password provided by your Internet service provider (ISP). This section
demonstrates how to set up a Point-to-Point Protocol over Ethernet (PPPoE)
connection on Windows.
On Windows 7
1.
Choose Start > Control Panel > Network and Internet > Network and
Sharing Center.
2.
Under Change your networking settings, click Set up a new connection or
network.
3.
In the Set Up a Connection or Network window, select Connect to the
Internet and click Next.
4.
Click Broadband (PPPoE).
5.
In User name and Password, enter the dial-up connection account name and
password provided by your ISP. In Connection name, name the dial-up
connection. Select or deselect Allow other people to use this connection.
Then click Connect.
The LAN port is connected to an Ethernet device
with a network cable, and data is being transmitted.
The LAN port is connected to an Ethernet device
(such as a computer) with a network cable, but no
data is being transmitted.
The HG531s V1 is connected to a USB device, and
data is being transmitted.
The HG531s V1 is connected to a USB device, but
no data is being transmitted.
3