Setup Screen - Yamaha TS-S User Manual

9.6
You can set the LCD contrast and backlight on time on the SETUP screen.
To set these items, follow the steps below.
Start up the SETUP screen.
1
Turn on the power while holding down the ▼
button.
Display the set contents of the LCD.
2
When the SETUP screen is displayed, press
the ▲ button to move the cursor to "LCD
SETUP", and then press the ▼ button.
The LCD SETUP screen will appear and
displays the set contents of the LCD.
c
CAutIoN
Do not change the set contents of the "CoM
SEtup" (communication setup). Doing so might
cause the tS-Monitor to display incorrectly.
5 Make the selected item changeable.
3
Press the ▲ button to move the cursor to a
desired item you want to change, and then
press the ▼ button.
After that, you can change the item you
have selected.
Change the setting.
4
Change the setting with the ▲ button and
press the ▼ button to set the setting you
have changed.
To change other setting item, repeat Steps 2
to 3.
CONTRAST : Set a contrast in steps of 1 to 5.
BACK LIGHT : Set a period of backlight on time.
n
NOTE
The backlight on time setting to be set in this step
is used when the screen is lit in blue (servo is on
and no error alarm occurs).
In other status, the backlight is lit or blinks
regardless of the backlight setting time.
Return to the SETUP screen.
5
Press the ▼ button while holding down the ▲
button.
To return to the normal startup screen from
the SETUP screen, press the ▼ button while
holding down the ▲ button when the SETUP
screen is displayed.
5-58
SETUP screen
ON : Always on.
OFF : Always off.
5 : Goes off after 5 sec.
10 : Goes off after 10 sec.
30 : Goes off after 30 sec.
Step 2
SETUP
LCD SETUP
COM SETUP
24510-M1-00
LCD SETUP
CONTRAST :
BACK LIGHT:ON
Step 3
LCD SETUP
CONTRAST :
24511-M1-00
BACK LIGHT:ON
LCD SETUP
CONTRAST :
BACK LIGHT:ON
"LCD SETUP" screen
3
Selected item becomes changeable.
3
3