Version 3.10” below. Please also refer to the “Operation Manual” that comes with your Disklavier control unit. You can also download or view the PDF file of the manual at the Yamaha Manual Library website: http://www.yamaha.co.jp/manual/english/ New Features for Version 3.10 Following are the new features in Version 3.10:...
Advanced Song Playback Using the Timer Play [SETUP] “TimerPlay” You can program your Disklavier to start or stop playback of a song at various specified times. All you need to do is register up to a maximum of 99 timer settings, and your Disklavier will perform them unattended. This function is called “timer play.”...
Advanced Song Playback You can set the day when the timer play function operates. _?=] =TimerPlay= >TimerPlay=ON 01[M-F ##:## PLAY Mem01] The following day settings are available: The timer play functions on every day of the week. The timer play functions only on Monday. The timer play functions only on Tuesday.
Enhancing the Disklavier by Hooking Up Other Devices Setting the Disklavier for Audio Data Reception/Transmission [SETUP] “AudioI/O” You can select how the Disklavier handles incoming/outgoing audio signals. The following options are available in Version 3.10. A-MIDI IN Offset In some video synchronized playback situations, the video may appear a little bit later than the piano playing (via analog MIDI).
Enhancing the Disklavier by Hooking Up Other Devices Select “AudioI/O” with the cursor buttons ([ ]), then press [ENTER]. =SETUP MENU= (1/3) *TimerPlay *AudioI/O *MIDI *M-Tune The audio I/O setting screen appears. =AudioI/O= OMNI IN=AutoDetect OMNI IN VOL=100 Select a desired option with the cursor buttons ([ then press [+/YES] and [–/NO] to change setting.
Other Settings Assigning Frequently-used Functions to the Number Keypad on the Remote Control [SETUP] “Shortcut” You can assign the number keypad of the remote control ( thru  and ) a series of procedures for often used functions. ■ Assigning Functions Press [SETUP] on the remote control.
Other Settings Press [+/YES] and [–/NO] to select the desired function. ?=]-+ =Shortcut= 3[----- 4[PLAY Mem01 --- ] The following functions are available: Option Description PLAY Starts playback of songs in the selected album or playlist. Starts repeat playback of a song or songs in the selected album or playlist.
Other Settings When “RPT” is selected: Option 1 Option 2 Description Mem01 - Starts repeat playback of all songs in the album selected for option 1 from the first Mem99 song. 001 - 999 Starts repeat playback of the song selected for option 2 in the album selected for option Lst01 - Starts repeat playback of all songs in the...
Other Settings ■ Using the Shortcut Holding the green button on the remote control, press the corresponding number button on the number keypad to execute the assigned function. Hold Adjusting the Brightness of the Display [SETUP] “Display” You can adjust the brightness of the display. You can also set the display to dim after a certain amount of time has elapsed without someone operating the instrument.
Other Settings Press [+/YES] and [–/NO] to change the brightness. ?=-+ENT =Display= *Brightness=80% *Dim light=OFF The following brightness settings are available: 40%, 60%, 80%, 100%. Note: To set the time for the display to dim, press [ ] to move The brightness of the display will the cursor to the dim light parameter, then press [+/YES] return to its original setting when you...
Other Settings ■ Setting the Passcode Press [SETUP] on the remote control. The setup menu screen appears. =SETUP MENU= (1/3)] *TimerPlay *AudioI/O *MIDI *M-Tune Select “Passcode” with the cursor buttons ([ ]), then press [ENTER]. _(3/3) =SETUP MENU= *Passcode *Reset The passcode setting screen appears.
Other Settings ■ Setting the MAC Address If you find it too inconvenient to have to enter a passcode each time you access the Disklavier from an external remote controller, you can set the MAC address of the external remote controller. This will allow the external remote controller with the registered MAC address to access your Disklavier without entering the passcode.