Installation Conditions - Yamaha TS-S User Manual

2. Installation conditions

This section explains the installation conditions necessary to operate the controller in safe and correct
manner.
Installation location
n
2
Install the controller inside the control panel.
Installation direction
n
Install the controller on a vertical wall.
Surrounding space
n
Install the controller in a well ventilated location, with space on all sides of the controller (See the figure below.).
Ambient operating temperature and humidity
n
The controller's ambient operating temperature and humidity must be maintained within the following ranges.
• Ambient temperature : 0 to 40˚C
• Ambient humidity
Environments to be avoided
n
To ensure safe and correct controller operation, avoid using the controller in the following environments.
• Environments which contain corrosive gases such as sulfuric acid or hydrochloric acid, or where flammable gases and
liquids are present in the atmosphere.
• Environments with excessive dust.
• Environments which contain metal cutting chips, oil, and water, etc., from other machinery.
• Environments subject to excessive vibration.
• Environments where electromagnetic noise or electrostatic noise is generated.
• Environments exposed to direct sunlight.
c
CAutIoN
• Do not install the controller upside down or at an angle. Doing so could reduce the cooling capacity and
cause performance deterioration or malfunctions.
• Provide the prescribed spacing between the controller and the inner face of the control panel, and between
the controller and other devices.
• Avoid using the controller in environments other than those specified. Usage in inappropriate environments
could cause product deterioration and malfunctions.
2-4
Surrounding space
TS-S, TS-S2, TS-SH
20mm
or more
10mm
or more
20mm
or more
: 35 to 85% RH
(no condensation)
TS-X, TS-P
10mm
20mm
or more
or more
20mm
or more
20mm
or more
20mm
or more
23202-M0-00