Yamaha TS-S User Manual page 63

CC-Link
n
Terminal arrangement and connector specifications
5 4 3 2 1
Connection method
TS-S, TS-S2,
TS-SH
CC-LINK connector
Jump socket
Wiring method
* We recommend that you use heat-shrink tubing to protect the drain wire and the other wires.
n
NOTE
The CC-Link unit supports CC-Link Ver.1.10. The use of Ver.1.10 compatible CC-Link cable eliminates some
restrictions which apply to items such as the cable length between nodes, etc. For details, refer to the instruction
manual for the Ver.1.10 compatible master station PLC.
TS-X, TS-P
Manufacturer part name
35505-6000-B0M GF 3M Japan Corporation
35715-L010-B00 AK 3M Japan Corporation
Insert the cable all the way into
the connector, and view from the
top cover to verify that the wires
are fully inserted (to the position
of the dotted line).
Position the pliers from the side of
the connector, and press the
cover onto the body to clamp the
connector onto the cable.
Verify that the cover is level with
the body, and that there is no gap
between the body and the cover.
No. Name
1 DA
2 DB
3 DG
4 NC
5 SLD
CC-Link connector
Jump socket
Manufacturer name
2
23212-M0-00
23213-M0-00
23220-M0-00
2-27