Cabinet Setup; Virtual Front Panel Size - Yamaha Nexo NXAMP4X4 User Manual

NXES104 EXPANSION BOARD AND REMOTE CONTROL

(22) Cabinet Setup

Pressing the "Set" button in this control displays the list of the setups available into the
memory of the NXAMP. By default only the setup from the same family are displayed.
NB: First time you press the "Set" button for a NXAMP firmware that is not known yet by
ESmonitor on this computer, it might take a few seconds to read all the setups available.
Then, the setups name and number are stored on the computer itself, so next time no
need to wait.
The current setup is marked with a star. You can also see the setup number if the left
column. If you go to "Show all setups" mode by pressing the radio button, then all the
setups available in the units will be displayed.
If you recall a setup from a different family, a confirmation window will appear to prevent
any mistake. A key combination on the computer keyboard will be then required to confirm
the selection.

(23) Virtual front panel size

In order to fit on smaller computer screen, you have the possibility to reduce the size of
the virtual front panel to be able to display all the control of the unit on screen. There are
three sizes available: Maximized (the whole virtual front panel is displayed), intermediate
(only the virtual LCD display is visible) and minimized (only the part above the LCD is
displayed).
PAGE 74 OF 91