Remote Programming; Requesting Readings; Requesting Command Settings - Keithley 2601 Reference Manual

Section 1: Getting Started
Table 1-5 (continued)
Default settings
Sense mode
Source:
Function
Current value
Voltage value
Current range
Voltage range
Speed
Triggering:
Trigger-in source
Count
Interval
Delay
TSP-Link node

Remote programming

Programming information is integrated with front panel operation throughout this manual. Basic
command information is listed in tables. For specific information on programming, refer to
Section

Requesting readings

You can request readings by including the appropriate measurement command as the argument
for the print command. For example, the following will request a Channel A current reading:
print(smua.measure.i())

Requesting command settings

In a similar manner, settings for commands can be requested by including the command as the
argument for the print command. For example, the following command will request the voltage
source setting for Channel A:
print(smua.source.levelv)
1-24
This page left blank intentionally.
2, Section 12, and Section 13
Return to
Series 2600 System SourceMeter® Instruments Reference Manual
2-wire
Voltage
0A
0V
100nA Models (2601/2602/2611/2612)
1nA Models (2635/2636)
100mV Models (2601/2602)
200mV Models /2611/2612/2635/2636)
Normal (1 PLC)
Immediate
Finite
0s
0s
1
of this manual.
Section Topics 2600S-901-01 Rev. C / January 2008