File Management Tasks - Keithley 2601 Reference Manual

Section 2: TSP Programming
CAUTION
With communications between the TSB and the SourceMeter opened, the flash programmer can
be accessed using the Menu icon as follows:
Click Menu icon > Select Instrument > Click Flash
Use the displayed browser to select the downloaded file and click Open to start the upgrade. See
"Flash firmware

File management tasks

A project, along with its associated files (e.g., script files), resides in a workspace folder. Typical file
management tasks include the creation of new projects and script files (see
modifying a
also be imported from a Series 2600 into Test Script Builder, where it can be modified (for details,
see "Retrieving scripts from the Series
Other typical file management tasks include
another
management tasks are explained as follows:
Creating a new workspace
Additional workspaces can be created anywhere in your file system. A new workspace is simply a
new folder for project files. A new folder for a workspace can be made from TSB as follows:
1. At the top of TSB, click File on the toolbar to open the file menu and then click Switch
Workspace to open the Workspace Launcher
2. Click the Browse button to open the Select Workspace Directory browser and select the
location for the new folder.
location for the new workspace folder. Keep in mind that the workspace folder can be located
anywhere in your file system.
3. In the Select Workspace Directory, click the Make New Folder button. A folder named New
Folder will be inserted at the selected location.
4. In the browser, right-click New Folder and click Rename in the mouse menu.
5. Type in a name for the new workspace folder (e.g., workspace2) and press Enter.
6. In the browser, click OK, and then click OK in the Workspace Launcher. Test Script Builder will
close and then reopen using the new workspace.
There will not be any projects residing in the Project Navigator for the new workspace. New
projects and script files can be created as explained in
this section. A project (along with its script files) can be imported into the new workspace from
another workspace folder. See
2-30
External circuitry connected to input/output terminals while
attempting a flash upgrade may cause instrument and/or DUT
damage. Disconnect input/output terminals before performing a
flash upgrade.
upgrade" in Section 13 for details.
script" earlier in this section for details on file management tasks). A script project can
workspace," "Switching
Figure
"Importing a project from another
Return to
Series 2600 System SourceMeter® Instruments Reference Manual
2600," previously described in this section).
"Creating a new
workspaces," and "Deleting projects and/or script
(Figure
2-20B shows the Test Script Builder folder selected as the
"Creating and modifying a
Section Topics
"Creating and
workspace," "Importing a project from
2-20A).
workspace" that follows.
2600S-901-01 Rev. C / January 2008
files." These file
script" earlier in