Introduction - Keithley 2601 Reference Manual

Section 13: Factory Scripts

Introduction

The Series 2600 is shipped with one or more Factory Scripts saved in its flash firmware memory. A
factory script is made up of a number of functions. Some of them can be called from the front panel
LOAD TEST menu. All of them can be called using remote programming.
As Keithley Instruments develops additional factory scripts, they will be made available on the
Keithley Instruments web site (www.keithley.com) as a flash firmware upgrade for the Series 2600.
See "Flash firmware
Factory script
KIGeneral
The KIGeneral factory script is made up of the following functions. All of these functions can be
accessed from both the front panel and the remote interfaces.
PulseIMeasureV(smu, bias, level, ton, toff, points)
PulseVMeasureI(smu, bias, level, ton, toff, points)
SweepILinMeasureV(smu, starti, stopi, stime, points)
SweepVLinMeasureI(smu, startv, stopv, stime, points)
SweepILogMeasureV(smu, starti, stopi, stime, points)
SweepVLogMeasureI(smu, startv, stopv, stime, points)
SweepIListMeasureV(smu, ilist, stime, points)
SweepVListMeasureI(smu, vlist, stime, points)
Details on the above functions are provided in the following tables.
Table 13-1
KIGeneral TSP test script: PulseIMeasureV
TSP project name:
TSP test script name:
Firmware version:
Function:
PulseIMeasureV(smu, bias, level, ton, toff, points)
Description
13-2
upgrade" for instructions on upgrading the flash firmware of your Series 2600.
KIFactoryGeneral
KIGeneral
1.0.2 and later
Performs a specified number of pulse I, measure V cycles:
• Sets the to output
smu
• Sets the to output
smu
• Performs voltage measurement with source at
• Sets the to output
smu
• Repeats the above sequence for
Return to Section Topics
Series 2600 System SourceMeter® Instruments Reference Manual
amps and dwell for
bias
amps and dwell for
level
level
amps for seconds.
bias toff
pulse-measure cycles.
points
seconds.
ton
seconds.
ton
amps.
2600S-901-01 Rev. C / January 2008