Keithley 2601 Reference Manual page 32

Section 1: Getting Started
TRIG
MENU
EXIT
ENTER
3 Range keys:
AUTO
4 Output control and LED status indicator:
OUTPUT ON/OFF
LED indicator
5 Rotary knob and CURSOR keys:
When in source edit, use the CURSOR keys for cursor control, and then rotate the knob to change a
source or compliance value. The rotary knob can also be used to enable or disable the source edit mode.
When in a menu, use the CURSOR keys or rotary knob for menu item cursor control. When displaying a
menu value, use the CURSOR keys for cursor control and rotate the knob to change the value. Pressing
the knob opens a menu item or selects a menu option or value.
6 Display annunciators (not shown):
EDIT
ERR
REM
TALK
LSTN
SRQ
REL
FILT
AUTO
ARM
TRIG
* (asterisk)
1-8
Triggers readings.
Accesses the main menu for saving and recalling setups, selecting a remote interface, line
frequency, self-tests, serial number, and beeper control.
Cancels selection and backs out of menu structure. Also used as a LOCAL key to take the
unit out of remote.
Accepts selection and moves to the next choice or exits the menu.
and Selects the next higher or lower source or measure range.
Enables or disables source or measure auto range.
Turns source output on or off.
Turns on when output is on.
Unit is in the source editing mode
Questionable reading or invalid cal step
Unit in remote mode
Unit is addressed to talk
Unit is addressed to listen
Service request
Relative mode enabled
Digital filter is enabled
Auto source or measure range is selected
Unit is armed and ready to run
External triggering is selected
Readings are being stored in the buffer
Return to
Series 2600 System SourceMeter® Instruments Reference Manual
Section Topics 2600S-901-01 Rev. C / January 2008