Keithley 2601 Reference Manual page 408

Section 13: Factory Scripts
Table 13-17 (continued)
KIGeneral TSP test script: QueryPulseConfig
TSP project name:
TSP test script name:
Firmware version:
Function:
QueryPulseConfig
Usage:
tbl = QueryPulseConfig(tag)
See Also
Description
For Firmware
version 1.3.0
Table 13-18
KIGeneral TSP test script: InitiatePulseTest
TSP project name:
TSP test script name:
Firmware version:
Function:
InitiatePulseTest
Usage:
f, msg = InitiatePulseTest(tag)
Description
Parameters
Return
Values
Output
Data
13-30
KIFactoryPulse
KIPulse
1.2.0 and later
ConfigPulseIMeasureV, ConfigPulseVMeasureI,
ConfigPulseIMeasureVSweepLin,
ConfigPulseVMeasureISweepLin,
ConfigPulseIMeasureVSweepLog,
ConfigPulseVMeasureISweepLog
Once a pulse train has been configured and assigned to a tag, it is often times
desirable to inspect the settings of this pre-configured pulse train.
QueryPulseConfig() can be used for this purpose. This function will return a
table containing the various settings associated with the tag input parameter.
Please note that time off, sync_in_timeout, and sync_in_abort parameters will
have different values.
KIFactoryPulse
KIPulse
1.2.0 and later
This function initiates the pulse configuration assigned tag.
tag: Numeric identifier of pulse train configuration to be initiated.
A Boolean flag. This flag will be true when the pulse was successfully
f:
configured, false when errors were encountered.
A string message. If the f flag is false, msg will contain an error
msg:
message. Otherwise, msg will contain a string indicating successful
configuration.
None
Return to Section Topics
Series 2600 System SourceMeter® Instruments Reference Manual
2600S-901-01 Rev. C / January 2008