Keithley 2601 Reference Manual page 494

Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
Specifications Category
Host Interfaces
IEEE-488
RS-232
Power Supply
Cooling
Warranty
EMC
Safety
Dimensions
Weight
Environment
Altitude
Operating
Storage
Specifications are subject to change without notice.
Page 8 of 8
Specifications
Computer control interfaces
IEEE-488.1 compliant. Supports IEEE-488.2 common commands
and status model topology
Baud rates from 300bps to 115200bps. Programmable number of
data bits, parity type, and flow control (RTS/CTS hardware or
none). When not programmed as the active host interface, the
SourceMeter can use the RS-232 interface to control other –
instrumentation
INTERLOCK Pin
(on DIGITAL I/O
connector)
Rear Panel
100 V to 240 VAC, 50 Hz – 60 Hz (manual setting), 240 VA max
Forced air. Side intake and rear exhaust. One side must be
unobstructed when rack mounted
1 year
Conforms to European Union Directive 2004/108/EEC,
EN 61326-1
Conforms to European Union Directive 73/23/EEC, EN 61010-1,
and UL 61010-1
89 mm high × 213 mm wide × 460 mm deep (3 1 ⁄2 in × 8 3 ⁄8 in ×
17 1 ⁄2 in). Bench Configuration (with handle & feet): 104 mm high ×
238 mm wide × 460 mm deep (4 1 ⁄8 in × 9 3 ⁄8 in × 17 1 ⁄2 in)
2635: 4.75 Kg (10.4 lbs).
2636: 5.50 Kg (12.0 lbs).
For indoor use only
Maximum 2000 meters above sea level
0° – 50°C, 70% R.H. up to 35°C. Derate 3% R.H./°C, 35° – 50°C
– 25°C to 65°C
System SourceMeter
Read by firmware
Coil
+220V Supply
Resistance
145Ω ±10% –220V Supply
10kΩ
Chassis
To output stage
Ground
SPEC-2635_2636 Rev. A / September 2007
Model 2635/2636
®
Specifications