Keithley 2601 Reference Manual page 429

Series 2600 System SourceMeter® Instruments Reference Manual
display.waitkey
The
display.waitkey
key = display.waitkey()
After sending the
press a front panel key. For example, if the MEAS key is pressed, the function will return the value
86, which is the keycode for that key. The keycode values are listed in
Example: The following code will prompt the user to press the EXIT key to abort the script, or any
other key to continue it:
display.clear()
display.setcursor(1, 1)
display.settext("Press EXIT to Abort")
display.setcursor(2, 1)
display.settext("or any key to continue")
key = display.waitkey()
display.clear()
display.setcursor(1, 1)
if (key == 75) then
display.settext("Test Aborted")
exit()
else display.settext("Test Continuing")
end
The above code captures the key that is pressed by the operator. The keycode value for the EXIT
key is 75. If EXIT is pressed, the script aborts. If any other key is pressed, the script will continue.
2600S-901-01 Rev. C / January 2008
function captures the keycode value for the next key press:
function, the script will pause and wait for the operator to
display.waitkey
Return to Section Topics
Section 14: Display Operations
Table 14-3.
14-15