Keithley 2601 Reference Manual page 362

Section 12: Instrument Control Library
status.standard.*
status.standard.condition
status.standard.enable
status.standard.event
* = condition, enable or event
Attribute Standard event register set.
Reads condition, enable and event registers:
Usage
standardreg = status.standard.condition
standardreg = status.standard.enable
standardreg = status.standard.event
Writes to enable register:
status.standard.enable = standardreg
Set standardreg to one of the following values:
0
status.standard.OPERATION_COMPLETE
status.standard.OPC
status.standard.QUERY_ERROR
status.standard.QYE
status.standard.DEVICE_DEPENDENT_ERROR
status.standard.DDE
status.standard.EXECUTION_ERROR
status.standard.EXE
status.standard.COMMAND_ERROR
status.standard.CME
status.standard.USER_REQUEST
status.standard.URQ
status.standard.POWER_ON
status.standard.PON
standardreg
To set bit B0 (OPC), set
To set bit B2 (QYE), set
To set bit B5 (CME), set
To set more than one bit of the register, set standardreg to the sum of their decimal
weights. For example, to set bits B0 and B2, set standardreg to 5 (1 + 4).
12-102
can also be set to the decimal weight of the bit to be set. Examples:
to 1 (2
standardreg
to 4 (2
standardreg
to 32 (2
standardreg
Return to Section Topics
Series 2600 System SourceMeter® Instruments Reference Manual
Clears all bits.
Sets OPC bit (B0).
Sets OPC bit (B0).
Sets QYE bit (B2)
Sets QYE bit (B2).
Sets DDE bit (B3).
Sets DDE bit (B3).
Sets EXE bit (B4).
Sets EXE bit (B4).
Sets CME bit (B5).
Sets CME bit (B5).
Sets URQ bit (B6).
Sets URQ bit (B6).
Sets PON bit (B7).
Sets PON bit (B7).
0
).
2
).
5
).
.
2600S-901-01 Rev. C / January 2008