Authentication Dot1X Default; Dot1X Default; Dot1X Max-Req - Edge-Core ES4612 Management Manual

4
Command Line Interface

authentication dot1x default

This command sets the default authentication server type. Use the no form to
restore the default.
Syntax
authentication dot1x default radius
no authentication dot1x
Default Setting
RADIUS
Command Mode
Global Configuration
Example
Console(config)#authentication dot1x default radius
Console(config)#

dot1x default

This command sets all configurable dot1x global and port settings to their default
values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#

dot1x max-req

This command sets the maximum number of times the switch port will retransmit an
EAP request/identity packet to the client before it times out the authentication
session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Default
2
4-80