Table of Contents
Advertisement
Client to Gateway
By setting this page, you can create a new tunnel between Local VPN device and mobile user.
You can select Tunnel to create tunnel for single mobile user, or select Group VPN to create
tunnels for multiple VPN clients. Group VPN feature facilitates the setup and it's not necessary
to individually configure remote VPN clients.
Tunnel
1.
Tunnel No.: The tunnel no. will be generated automatically from 1~100.
2.
Tunnel Name: Once the tunnel is enabled, enter the Tunnel Name field. Such as, Sales
Name. This is to allow you to identify multiple tunnels and does not have to match the
name used at the other end of the tunnel.
3.
Interface: Select the Interface from the pull-down menu. When dual WAN is enable,
there will be two options. (WAN1/WAN2).
4.
Enable: Check the box to enable VPN.
Group VPN
1.
Group No.: The group no. will be generated automatically from 1~2. Two GroupVPNs
VR-100 8-Port Dual-WAN VPN Router
• 77 •
Advertisement
Table of Contents
