Ip Settings And Setting A Fixed Ip Address On The Device; Ip Settings On The Device - Eaton easyE4 Application Note

3.3 IP settings and setting a fixed IP address on the device

3.3.1 IP settings on the device

For devices with display, you can also change the IP settings via the easyE4 keyboard. Your easyE4
must be in STOP for this:
Start display of the easyE4.
Press OK and proceed with the arrow key to „System-Opt."
Press OK and use the arrow key to go to „Ethernet".
Press OK. Under "Address Mode" you set the desired IP setting.
Press OK. Select with the arrow keys „Auto IP", „Static IP" or „DCHP" and confirm the se-
lection with OK. A tick is placed behind the corresponding selection.
9
Application Note Establish Ethernet connection between easyE4 and easySoft V7 04/2020 AP050013ENEN www.eaton.com