Show Access-Group Mode Interface - Cisco 4500M Command Reference Manual

2 2
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show access-group mode interface

To display the ACL configuration on a Layer 2 interface, use the show mac access-group interface
command.
Syntax Description
interface
interface-number
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(19)EW
Usage Guidelines
Valid values for the port number depend on the chassis used.
Examples
This example shows how to display the ACL configuration on interface fast 6/1:
Switch# show access-group mode interface fast 6/1
Interface FastEthernet6/1:
Access group mode is: merge
Related Commands
access-group mode
78-16201-01
show access-group mode interface [interface interface-number ]
(Optional) Interface type; valid values are ethernet, FastEthernet,
GigabitEthernet, and port-channel .
(Optional) Interface number.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show access-group mode interface
2-239