Table of Contents
Advertisement
Entering Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the
operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can
save power simply by pressing
When in sleep mode
●
When the machine enters sleep mode,
Situations in which the machine does not enter sleep mode
●
When the machine is in operation
●
When the Data indicator is lit up or blinking
●
When the machine is performing an operation such as adjustment or cleaning
●
When a paper jam occurs
●
When the receiver of the external telephone is off the hook
●
When the machine is set such that the fax incoming ring will not sound
●
When receiving a fax, the ring tone is set not to sound.
●
When the menu screen is displayed
●
When a job is waiting to be scanned to a USB memory device or to a computer
●
When an error message is displayed on the screen (There are some exceptions. The machine sometimes
enters sleep mode when error messages are displayed.)
●
When the machine is communicating with an LDAP server, etc.
●
When the SSID/network key screen for Direct Connection is displayed
●
When settings are being imported or exported
Changing the Auto Sleep Time Value
Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a
specified length of time. We recommend using the factory default settings (
Settings>(P. 449) ) to reduce power usage. If you want to change the amount of time that elapses before the
machine enters the auto sleep mode, perform the procedure below.
Basic Operations
on the operation panel.
lights up yellow green.
180
1647-03L
<Timer/Energy
Advertisement
Table of Contents
