Fts Constant M/B; Datalogging - Thermo Scientific Partisol 2000i Instruction Manual

Firmware Screen Descriptions
Instrument Setup Menu
Reset Flow Cal

FTS Constant M/B

Datalogging

9-28 Partisol 2000i and Partisol 2000i-D Instruction Manual
SET NUMBER OF POINTS:
CURRENTLY:
SET TO:
 CHANGE VALUE
CTRST SSET
The Reset Flow Cal menu item is used to reset the flow calibration
parameters.
In the Main Menu, choose Instrument Setup > Flow Calibration Setup
●
> Flow > Reset Flow Cal > press
parameters.
The Flow Constant M/B screen allows the user to adjust the setpoint. The
Flow Constant B screen functions in the same manner as the Flow
Constant M screen shown in the example.
In the Main Menu, choose Instrument Setup > Flow Calibration Setup
●
> Flow > FTS Constant M.
FTS CONSTANT M:
CURRENTLY:
SET TO:
 MOVE CURSOR
 CHANGE VALUE
CTRST SSET
The iSeries instruments include a built-in data logging capability as a
standard feature. The operator is allowed to create two different types of
records, which for historical reasons are named lrecs (long records) and
srecs (short records). Each record can contain up to 32 different fields or
data items, and records can be created at user-defined intervals ranging
from 1 to 60 minutes.
Record generation is tied to the instrument's real-time clock. For example,
if the logging period for srecs is set to 30 minutes, a new srec will be
generated on every hour and every half hour (10:00, 10:30, 11:00 ...).
Lrecs and srecs can be interleaved.
The Sampler's computer system includes three megabytes of flash memory,
which is enough to store a full lrec containing 32 data items and a full srec
containing 32 items once each minute for a week (>20,000 total records).
5
5
SAVE
INSTS STAT
to reset the flow calibration
0.0000
0.0000
SAVE
INSTS STAT
Thermo Fisher Scientific