Default Set - MIMAKI SWJ-320 S2 Maintenance Manual

MAINTENANCE MANUAL > Adjustment > Adjustment Items > DEFAULT SET
Model SWJ-320S Issued 2012.07.19 Revised

4.2.10 DEFAULT SET

 Outline
Returning each parameter to the initial value.
 DEFAULT SET List of Items
No Item
1 SYSTEM PARAMETER
2 SHIPPING set
3 MAINTE PARAMETER
4 SERVO PARAMETER
5 FEED PARAMETER
6 HEAD PARAMETER
7 OPE PARAMETER
8 INK PARAMETER 1
9 INK PARAMETER 2
10 DEBUG PARAM
11 SCAN PARAMETER
12 NOZLE RECOCVERY PARAM
 Work Procedures
FUNCTION
#ADJUST [ENT]
#ADJUST
DEFAULT SET [ENT]
#DEFAULT SET
SYSTEM param. [ENT]
SHIPPING set
MAINTE PARAMETER
:
#DEFAULT SET
INITIAL. OK? :ent
Parameter initialized
© 2013 MIMAKI ENGINEERING CO.,LTD.
F/W ver
Operation
Initialize the parameter in question.
Initializing parameters of others than the adjustments.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
1. Select [#ADJUST] -> [DEFAULT SET].
2. Select the parameter to be initialized, and then fix it by [ENTER].
[] / []: Switch
[ENTER]: Confirms (to Confirmation display)
[END]: Return
3. Initialize by [ENTER].
[ENTER]: Execute
[END]: Return
1.0 Remark
Remarks
4.2.10
Rev.
1.0
1
2
3
4
5
6
7
8
R.1.0 P.1