MIMAKI SWJ-320 S2 Maintenance Manual page 195

MAINTENANCE MANUAL > Troubleshooting > Detailed Methods of Coping with the Malfunctions > Sorting process
Model SWJ-320S Issued 2012.07.19 Revised
7.2.1 Sorting process sheet of ink supply system's troubles
Perform cleaning several
times.
Perform test drawing to
check nozzle missing.
OK
Normal use
© 2013 MIMAKI ENGINEERING CO.,LTD.
NG
Execute Ink purge/Ink port
charging
Remaining amount OK
Perform test drawing to
check nozzle missing.
OK
NG
Check the remaining amount
of ink in the ink bottle.
Remaining amount OK
Check dirt around the cap/
the head.
Clean OK
Check cap leakage.
No leakage. OK
Check Ink tank sensor
([#TEST SENSOR SUBTANK])
OK
Check Ink tank liquid level
OK
Perform cleaning after
leaving it for one night.
Perform test drawing to
check nozzle missing.
OK
Normal use
F/W ver 1.0 Remark
Remaining amount
is not enough.
Ink bottle charge
Perform Cleaning of the Wiper,
NG
Cap and Media Press
Perform 7.2.2 Checking of the
NG
cap leak
Perform 3.1.2 Replacement of
NG
the SUBTANK
Perform 3.1.3 Replacement of
NG
the Ink Supply Pump
It is possible that fine air remains in the head.
(Flowing ink is not enough to remove them.)
NG
Replace Head
OK
It is a trouble of other than ink
supply system. Check other
than supply system.
Rev.
1.0
NG
7.2.1 R.1.0
1
2
3
4
5
6
7
8
P.1