MIMAKI SWJ-320 S2 Maintenance Manual page 136

MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Suction pump
Model SWJ-320S Issued 2012.07.19 Revised
6.2.4 Suction pump
 Work procedures
Tube
Tube pump 12 all assy.
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Open the cover RFU, and lay waste around the pump.
2. Loosen the lock ring, and disconnect the tube.
Loosen
Tube
3. Remove the screws(x2), and remove the tube pump 12 all
Screw
assy..
4. Reverse the disassembly procedure for reassembly.
F/W ver Remark
Pump assy.
Take care not to pollute the surroundings with
waste ink or washing liquid.
Be sure that the pump tube of the discharging side
is stored with the waste ink tank.
Rev.
1.0
1
2
3
4
5
6
7
8
6.2.4 R.1.0 P.1