MAINTENANCE MANUAL > Adjustment > Adjustment Items > INK PURGE
Model
SWJ-320S
Issued 2012.07.19 Revised
4.2.14 INK PURGE
Function
Moving the carriage to maintenance position of the left of machine, and discharging the optional ink.
Also, [#Ink purge] is used for the ink discharging/charging when the parts around ink are replaced.
Discharging the ink between the ink bottle and the print head or between the liquid supply pump and the print head,
by turning the liquid supply pump to ON/OFF.
When the following parts are replaced, perform the work according the referenced procedure.
Part name
Print head
Ink tank
Ink pump
Work Procedures
FUNCTION
#ADJUST
[ENT]
#ADJUST
INK PURGE
[ENT]
INK PURGE
CARRIAGE OUT
[ENT]
(Purge button enable)
INK PURGE
(ON )
COMPLETED
[ENT]
INK PURGE
(OFF )
COMPLETED
[ENT]
Purge button
Lamp button
Open/close cover
© 2013 MIMAKI ENGINEERING CO.,LTD.
Liquid supply pump
OFF
Ink discharging at part replacement (Liquid supply pump OFF)
see p.2
OFF
Ink discharging at part replacement ( Liquid supply pump ON)
ON
see p.3
1. Select [#ADJUST] -> [INK PURGE].
2. Press [ENTER] key to move the carriage to the maintenance
position.
3. Select ON/OFF of the ink pump.
ON:
The ink pump operates until the float sensor within the
ink tank turns ON.
OFF: The ink pump does not operate.
[] / [] :Liquid supply pump ON/OFF selection
[ENTER] : End
4. Check the ink color, and press the purge button.
5. Manually perform wiping.
6. Press [ENTER] key to end.
F/W ver
1.0
Remark
Reference
Rev.
1.0
1
2
3
4
5
6
7
8
4.2.14
R.1.0
P.1