MIMAKI SWJ-320 S2 Maintenance Manual page 180

Hide thumbs Also See for SWJ-320 S2:
Table of Contents

Advertisement

MAINTENANCE MANUAL > Disassembly and Reassembly > Drying unit relations > Drying Fan assy.
Model
SWJ-320S
Issued 2012.07.19 Revised
6.9.2 Drying Fan assy.
Drying fan assy. (x8)
 Work procedures
Drying fan unit
Screw(x2)
Unplug the power plug
Drying fan assy.
FG wire mounting screw
Connector
Screw(x4)
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Turn off the main power supply and remove the power plug
2. Turn off the main power of drying fan unit, and then unplug the
3. Unscrew the screws of both sides of the drying fan unit, and
Screw(x2)
4. Remove the cable duct lid of the back of drying unit.
5. Disconnect the connector of the warm breeze assy. from the
6. Disconnect the FG wire connected to the drying fan assy.
7. Remove the screw, and remove the drying fan assy..
Drying fan assy.
8. Reverse the disassembly procedure for reassembly.
F/W ver
Remark
from the main body.
power plug from the drying fan unit.
remove the drying fan unit from the main body.
When the drying fan unit is removed, be sure to
work with more than two persons, paying atten-
tion not to drop it nor damage the surroundings.
relay connector.
Rev.
1.0
1
2
3
4
5
6
7
8
6.9.2
R.1.0
P.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Swj-320 s4

Table of Contents