MIMAKI SWJ-320 S2 Maintenance Manual page 77

MAINTENANCE MANUAL > Adjustment > Adjustment Items > HEAD WASH
Model SWJ-320S Issued 2012.07.19 Revised 2013.03.08 F/W ver
4.2.13 HEAD WASH
INK PORT WASHING
Carriage moves to Left
START [ENT]
maintenance position.
Ink discharge tray
Purge button
INK PORT WASHING
Carriage moves to Capping
COMPLETED [ENT]
position.
REMOVE WASH BOTTLE
COMPLETED [ENT]
WASHING
PLEASE WAIT
INK PORT DISCHARGE
Carriage moves to Capping
position.
COMPLETED [ENT]
WIPER&CAP CLEANING
COMPLETED [ENT]
wiper cleaning
cap cleaning
© 2013 MIMAKI ENGINEERING CO.,LTD.
6. Move the Carriage to left maintenance position with press
[ENTER] key.
7. Insert the air purge jig into the ink port, and purge the washing
liquid.
Air purge jig
8. Manually perform wiping.
9. Move the Carriage to the capping position with press [ENTER]
key.
10. Remove the wash bottle, and press the [ENTER] key.
11. .Repeat above procedure steps from 5. to 8.
12. Move the Carriage to the capping position with press [ENTER]
key.
13. Clean the wiper and cap.
Press [ENTER] key after cleaning is completed, and then finish
the procedure.
1.0 Remark
 Set so that the tips of the air purge jig come into
contact with the bottom of the discharge tray.
Counter flow of the washing liquid and inflow of
the air may be occurred.
 Purge the air and then discharge the washing liquid
from the tip of the jig by pressing the purge button,
and then end after it is completed.
Rev.
1.2
1
2
3
4
5
6
7
8
4.2.13 R.1.2 P.2